BPM-MR100 Mobile X Ray Machine

Main Features:

• This efficiency-improved x ray machine takes the following advantages:
• Adopts high-pressure silicon, full-wave rectification technology. 
• With kilovolt (kV), milliampere (mA) and time (s ) three factors interlocks control system  
• Overloading indicator & the protection circuit of excessive voltage & insufficient voltage, thus the X ray tube head of x ray will not be damaged because of mis-operating.
• Equipped with steady filament voltage circuit to control the X ray dosage while photographing
• Remotely controlled exposure & manually controlled exposure options 
• Sound & flash indicator while exposing for patients & medical personnel convenience
• This x ray machine equipped the electricbeam limiter with shadow positioning. The electric beam limiter will send out a beam of visual light while operating to aim the nidus and the scale ofthe visual light overlaps ,the scale of X ray exposing. This function make it convenient that medical personnel position the nidus & the x ray exposed area. 
• Movable cantilever sliding in vertical direction so that it is flexible to adjust the Xray tube head to appropriate angle & height. When the complete machine is moved, the cantilever of theXray tube head can be set to the min. position and lock, safely and conveniently.

Specification:

• This machine is a single focus point, full-wave rectification bedside X ray medical diagnosis machine
• Maximum Ratings: 

• Condition of the power supply Single-phase alternating current   Voltage: 180V-250V    Frequency: 50Hz  Power supply resistance ≤0.2Ω   Instantaneous electric current: 37A (Max)
• Timer 0.08-6.3s,    20 shelves of electron type    5. X ray tube specification : XD4-29/100, focus 4.3 
• X ray tube focus highest position (above ground level)≥1710mm 
• X ray tube focus lowest position (above ground level)≤480mm 
• Remotely exposure distance: 6m                    
• The required pulling force to move the whole machine≤25kg
• Power of Electric Beam Limiting Device: AC 24V, Capacity 110W.
• Indicator Power of Electric Beam Limiting Device: AC 24V, Power: 100W, Tungsten Haloid Light
• Illuminance of Electric Beam Limiting Device: no less than 100Lx at 1m from X ray focus to target area
• When X ray focus at 650mm away from the film, max illumination scale ≤350mm×350mm; 
• When X ray focus at 1m away from the film, max illumination scale ≤50mm×50mm

BPM is the best mobile x ray machine supplier. Welcome your inquiry.